Product Description
Osmo TopOilHigh Solid is a Food-safe Hardwax-oil wood finish which is extremely tough and hardwearing. It is water repellent and dirt resistant as well as resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water. These types of liquid spillages will tightly bead on the surface without leaving any marks, simply clean by wiping with a cloth.
Clear or transparent oil-wax combination for treating furniture and kitchen worktops made of wood. Microporous surface does not crack, peel, flake or blister.
Spill resistance to DIN 68861-1A (German industrial norm) = no water spots. When dry, finish is safe for humans, animals and plants and is suitable for children‘s toys as per EN 71.3 (European norm).
Available Osmo TopOil Colour Tones
3056 – Clear
3025 – Natural
3026 – Acacia
Note: The above colour shades are a true likeness of the original, after application onto Oak or Acacia. However, some variation may occur due to screen brightness and uploading processes. It is advisable to test colours on a small sample, as colour may appear differently on other wood species.
BY HAND WITH A CLOTH/RAG
Apply three thin coats with a lint-free cloth or 3M white pad.
- Scrub product into wood using cloth in a circular or figure 8 pattern
- Allow roughly 15-minutes for oils to penetrate
- Working with the grain, remove all excess product from surface
- Allow 8-10 hours drying time before recoating
- Apply second and third coats following previous steps
BY HAND WITH A BRUSH
Apply two thin coats with an Osmo Natural Bristle Brush or similar brush.
- With a brush, work product into wood working in all directions, ensuring a thin application
- Allow roughly 15-minutes for oils to penetrate
- Working the brush with the grain, evenly distribute all product on surface and remove excess
- There should be no visible high-build or film – if this is observed, product is over applied
- Allow 8-10 hours drying time before recoating
- Apply second coat following above procedure
- Clean brushes using Osmo Brush Cleaner and Thinner or Turpentine
Tinting: Osmo Wood Wax Finish can also be used to lightly tint TopOil 3056 up to a ratio of 10:1. Do not exceed a ratio of 10 parts TopOil 3056 to 1 part Wood Wax Finish.
Approx. Coverage
24m²/L (258ft2/L) with one coat
Number of Coats
2 coats: brush
3-4 coats: cloth
Application Temp.
+5°C to 35°C
Approx. Dry Time
8-10hrs.
Sizes
5mL, 0.5L
Reviews
There are no reviews yet.