Product Description
Osmo Polyx® Professional Hardwax-Oil is resistant to water and dirt, is extremely durable and smoothens wood surfaces whilst enhancing the natural beauty of the wood character. Solvent-free and under 50 g/L VOC offering an environmentally friendly alternative to professionals. Two coats are applied in one day (wet-on-wet) whereby the finish dries and cures within 8-12 hours!
Available Osmo Polyx-Oil Pure Colours
5125 – Clear Satin
Note: The above colour shades are a true likeness of the original, after application onto Oak. However, some variation may occur due to screen brightness and uploading processes. It is advisable to test colours on a small sample, as colour may appear differently on other wood species.
MECHANICALLY WITH A FLOOR BUFFER
Apply two thin coats with an Osmo FloorxCenter® or floor-buffing machine, with green and white pads.
First Coat: Apply one thin coat with an Osmo Double Sided Scraper, Professional Scraper or other high quality trowel, and Osmo FloorxCenter® or single disc floor-buffing machine.
- Stir the Polyx®-Oil Pure well prior to use.
- Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar.
- Disperse and polish the floor using a floor buffer and green pads.
- Allow approx. 35-45 minutes for product to penetrate surface
- Proceed immediately to second coat
Second Coat: Immediately after the first coat of Polyx®-Oil Pure, apply a second thin coat with a trowel and buffing machine.
- Trowel the second coat product thinly and evenly onto the floor.
- Allow approx. 35-45 minutes for product to penetrate surface
- Disperse and polish the floor, removing excess using a floor buffer and white pads
- There is too much material on the surface when you can see rings. If so, turn the pad over.
- Allow 8-10 hours drying time. Allow for good ventilation whilst drying
If using as a Polyx®-Oil Pure 5125 as a top coat over Polyx® Professional Colour Oils, proceed immediately to second-coat. Only one coat of Polyx-Oil is required over top of an Polyx® Professional Colour Oil therefore the first coat and its steps are omitted.
Tip: 13” (330mm) Pads on an Osmo FloorxCenter® will buff around 400ft2 before they require either flipping, or replacement
BY HAND WITH SCOTCHBRITE PADS
For small areas and furniture, apply two thin coats with a non-abrasive, white scotchbrite pad and a lint-free cloth.
- Stir the Polyx®-Oil Pure 5125 well and pour a small amount into a disposable container
- With a white scotchbrite pad work the product into the wood evenly in figure 8 or circular motions
- Be sure to thinly and evenly coat the surface and leave on the surface for approx. 35 minutes
- With a clean lint-free cloth, polish the surface ensuring no rings, wipe marks or blotches
- Ensure all excess product is removed from surface.
- Approx. 8-10 hours drying time. Allow for good ventilation whilst drying
- Apply second coat following steps 1-6
Tinting: Osmo Polyx® Professional Colour Oils can also be used to lightly tint Polyx®-Oil Pure 5125 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx®-Oil Pure 5125 to 1 part Professional Colour Oil.
Approx. Coverage
30m²/L (320ft2/L) with two coats
Number of Coats
2 coats (wet-on-wet)
Application Temp.
+5°C to 35°C
Approx. Dry Time
8-12hrs.
Sizes
5mL, .125L, 1L
Reviews
There are no reviews yet.